Go to Memory Address: (default:0x1000050) : 0x800026d8 LINUX started... ADM5120 Demo board CPU revision is: 0001800b Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 8kb, linesize 16 bytes (2 ways) Linux version 2.4.18-MIPS-01.00 (root@vaio) #1123 ²Ð 9· 20 23:10:13 ûfST 2005 am5120_setup() starts. System no PCI BIOS Determined physical RAM map: memory: 00e22000 @ 001de000 (usable) Initial ramdisk at: 0x80141000 (494520 bytes) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram0 console=ttyS0 CPU clock: 175MHz Calibrating delay loop... 174.48 BogoMIPS Memory: 14204k/14472k available (1131k kernel code, 268k reserved, 560k data, 52 k init, 0k highmem) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. block: 64 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize loop: loaded (max 8 devices) ADM5120 Switch Module Init NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.2.3: Stephen Frost . http://snowman.net/proje cts/ipt_recent/ ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. LED & GPIO Driver v1.0 RAMDISK: bzip2 compressed image found at block 0 bz2_load()...OK. Freeing initrd memory: 482k freed VFS: Mounted root (ext2 filesystem). Freeing prom memory: 0kb freed Freeing unused kernel memory: 52k freed Please press Enter to activate this console. BusyBox v1.00-pre2 (2004.03.07-08:52+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. -sh: /bin/init.sh: not found -sh: /bin/monitor.sh: not found -sh: webs: syslogd: shmget: Function not implemented not found [2] + Done(127) webs [1] + Done(127) /bin/monitor.sh -sh: /bin/setup: not found # # ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB) # ifconfig eth0 up # ifconfig eth0 inet 192.168.0.1 # ps PID Uid VmSize Stat Command 1 root 324 S init 2 root SW [keventd] 3 root SWN [ksoftirqd_CPU0] 4 root SW [kswapd] 5 root SW [bdflush] 6 root SW [kupdated] 7 root SW [mtdblockd] 13 root 412 S -sh 24 root 256 S klogd 28 root 288 R ps # # ifconfig eth0 Link encap:Ethernet HWaddr 00:50:FC:11:22:33 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:263 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:17002 (16.6 kiB) TX bytes:1328 (1.2 kiB) Interrupt:9 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB) # ls var tmp proc lib dev lost+found usr sbin linuxrc etc bin # tftp SIGSEGV # admswconfig eth0 is not an ADM5120 switch # admswconfig eth0 eth0 is not an ADM5120 switch # tftp 192.168.0.100 SIGSEGV #